It’s for a custom part for his bike. I don’t know more details but he promised to send a picture once it’s done

Silly, you just posted a picture of your key now everyone can access your passwords

and hoping it doesn’t rain

Some papers resist water and are not crazy expensive. If its a notebooksl you are going to carry everywhere I guess it could be a good buy.

Down anyone know of it works with belt printers? I had it, but it kept restarting some prints that were fine and never detected a failure :(

Same here, everytime I see a post like this I think that I may be on the spectrum, but on the other hand I don’t see any benefit on getting diagnosed now other than curiosity.

Also makes me wonder what else I’ve believed it’s completely common, but it’s not.

I read it as “sandpaper i made in a blender” and thought that its somehow recycled sandpaper

With this happenning and apple getting extorted to accept third party apps it would be funny if they switch places

Thanks i dropped the “to”

On the PDF to JPEG, you can also open the PDFs with an image editor, such as Inkscape or krita, and then save the image on the format and quality needed. This method also has the benefit that on some cases you play with the assets if needed. (Depends on how was the PDF generated)

What are you looking to convert?

Usually what i do is look for any converter and look for open source alternatives to it on alternativeto.net and hopefully one of the top 3 alternatives fits your use case

If anyone else is on the same situation what helped me find a new one is this site

https://tld-list.com/

There you can check pricing of several registrars for your domain and choose the one that you want and then you can see how to transfer to the chosen one.

Are the lines on the side of the print or on the top? Do they appear always on the same spots?

Try printing small callibration pieces, to see if it always happens

https://www.thingiverse.com/thing:4707289 https://www.tableflipfoundry.com/3d-printing/the-cones-of-calibration-v3/

https://ameralabs.com/blog/town-calibration-part/

From the picture it seems that you need to change your fep sheet. When you look at the fep does the lines coincide with the marks it has?

I have a domain with godaddy that renews very soon. Is it posible to migrate it to another registrar?

Sadly i need an ink printer. I already hace a laser one but sometimes i need to printer on papers that don’t work on laser

They were the last good guys :(

I guess it’s time to buy the printer I’ve been postponing

Nice! Which OS?

The durability comes with the design and the material used. As I said on another comment the first version was very fragile and was bending with barely any weight on it.

After adding a bracket to hold the glass in between it keeps its form even with food on top. It all depends on how you design the piece and in which direction you print. Not always the easiest way to print is the best for durability.

At the beginning I had several issues. If I remember correctly first I has to level the front part, then mark the distance with a wedge and have that same distance on the back.

For this it is important that when you’re adjusting the Y0 check on both edges and in the middle. It should be the same height overall

Once it’s leveled you need to adjust the Y offset until it sticks, for this you can print a zigzag pattern and it should stick equally well everywhere.

I remember I had saved some videos that explain that let me find them. Also the discord community is helpful for this particular printer

Yes, it looks better than I expected. I will seal it later to prevent bacterial growth as someone suggested here