Have a look at “wake timers”, they might be at fault and need disabling

It is. That’s why banks have publicly backed Wero in favor of the digital euro. It might also be a reason for the relatively low limits of the digital euro wallets, but that’s just my speculation.

The digital euro will be centralized on the European Central Bank, so the transactions do not depend on some local banks. It’s in direct competition with the banks themselves. But yeah, not that big a difference for the end user imho

My bad, mixed it up with this: https://github.com/mijorus/gearlever

This has a “check for updates” function, I’ve never bothered using it though.

You might want software like this: https://github.com/TheAssassin/AppImageLauncher

Might be a setup error on my part, but the P1S has had more print quality problems than my A1m. Also, when iterating on new drafts, I find it useful to have 2 printers to print staggered versions, reducing my wait times. Again, if you don’t have the resources to keep it, sell it by all means. After all, that’s what I did. But i do sometimes miss it’s simplicity and ease of use. Going back to your first question, i just never updated my a1m, nor my p1s, so they both worked fine with Orca slicer. The app and online functionality still works

I started it with the A1 mini, then got a Sovol sv08, then aP1S, after selling the A1m. If you can afford it, keep yours, I miss mine. Yes, its too small for some things, but unbeatable for everything that fits on it’s build plate.

Is there a list of printer (brand) specific communities?

Apply baby powder on the build plate, shake of the excess. Seems to fill in the gaps. I can’t recall where i learnt about it, but it works really well. Stickiness on textured pei is comparable to pla or petg.

I used to throw the textured pei plate with the sticking print into the freezer for 15 min, made removal much easier. Now I just add baby powder onto my build plate, and remove the print at room temp. Much easier, a little messier