So IT guys are antennas.

Already do that via a custom domain and SimpleLogin/Proton.

Reject TV. Return to monitor. Yeah monitors don’t come in the same sizes as TVs, but if you just want something that shows you whatever you feed its video ports without any bloat than a monitor works great.

Nothing pops a vein quite like companies acting like a one-time expense should be a monthly fee. Paying monthly for heated seats in certain cars is where I first heard of this. They already put the hardware in the car. I guarantee they already charged you for the parts and labor to put in those heated seats when you bought the vehicle. No way they’re losing money on it in the hopes you start paying them.

But I’ll get off my owner’s rights soapbox now.

I’ll have to try that smart plug idea. I have some heavy duty Z-wave plugs I used for Christmas decorations last year and that would work great for the fridge.

For those who are saying I shouldn’t have bought these half-baked smart appliances, I agree. But I wasn’t always this aware of the privacy issues involved. The washer and dryer were purchased before I grasped how problematic cloud-connected always online IoT devices are, and as mentioned in the OP the ability to tell me when my laundry was done seemed like a genuinely useful feature. In the case of the fridge it was an emergency replacement and we took what fit the preexisting niche in our kitchen, and the complete lack of output on the fridge itself necessitated the app.

Washer dryer and fridge are TCP only

Background: I just got my first printer (Bambu Lab A1 mini) last year. I am also not an engineer and, like you, don’t want the printer itself to be the hobby.

Based on my experience, and what I’ve seen others say online, Bambu Lab is still the king of “it just works”. If you’re not as ideologically motivated by right to own as I am, I’d say go with Bambu.

While I have zero experience with the company, Prusa seems to be the most consumer friendly, though they have their own issues. If I buy a second printer, it’s likely going to be the Prusa Core One.

Thanks. Not sure if this is what you meant. The shape is distinct but the colors are similar. My avatar is from a worldbuilding project I work on as a hobby.

I forgot about dev mode. How does that compare to pre-enshittified firmware?

I’m definitely an “it just works” guy, and I am by no means an engineer. For me the printing is the hobby, not the printer.

Multimaterial would be good, but only if it doesn’t have to purge between colors. I bought the AMS lite along with the mini, and while it’s convenient when I want to print something in a different color, only having one nozzle means a truly multi-color print takes orders of magnitude longer to finish unless the print itself is completely designed around the limitations of the single-nozzle setup. Having said that, if the MMS can also act as dry storage that would be a plus even if I primarily use one filament per print.

It’s less about specific build volume and more what I can fit into the existing space while providing more build volume than the Mini’s 7x7x7 inches. I’d say the overall footprint of the printer has to be less than 60 cm on a side, since the table my current printer is on is 60 cm deep.

Enclosure is also a must-have.

I was going to say about 10x10x10 inches, but after recalculating the dimensions of the latest thing I’m making (a pill bottle organizer) I may be able to squeeze it onto the mini, so the thing that prompted this post may be a non issue, at least for now. Continued suggestions are welcome though.

What exactly does the mini do that makes it worth keeping if I get a larger printer? I’m not sure I can justify owning more than one.

A wiki is probably what you want. I was going to suggest tvtropes, which is great for, say, a list of every superhero with X-ray vision, or every work of fiction containing dwarves, but I’m not sure that fits what you want.

I just checked this out. It’s not quite what I’m looking for right now but it does answer my question as asked. I can see it coming in handy later.

At the time of the OP I was testing federating two nodeBB instances. ActivityPub requires HTTPS AFAIK.

I’m attempting to run a NodeBB forum. I’m only assuming that web sockets was the issue because the first search result I came up with that matched my symptoms mentioned it.

Cool. Follow up question: Do I generate the cert once and distribute the same private key to all the servers I’m running? I’m guessing not, but does that mean I run the certbot command on every server?

I looked up Cloudflare tunnels and tried setting one up. Some things future readers may want to know:

1. You have to set Cloudflare as your domain’s authoritative nameservers.
2. You need to set up an account (not a problem) but also have to register a payment method, even for the free tier (no me gusta).
3. Regarding NodeBB specifically, if you set up a tunnel, you can access the forum, even over HTTPS, but it fails when you try to log in. A few minutes of searching leads me to believe it has something to do with web sockets, and the solution requires you to partially expose your IP address, defeating the principle purpose for me to use cloudflare in the first place.

Also, remote printing and monitoring are nice features, which would be a pity to lose.

I don’t see an easy way to accomplish this independent of Bambu’s servers, especially if you use the handy app on your phone.