Only if you define it.

const that = this

+1 for Backblaze. They have a convenient backup software too that works great. I backup my parents laptop using it, and use their S3 storage for my NAS backups.

A popular EHR cloud service that we use has a developer portal where operations such as logging in or entering two-factor codes would take upwards of 2 minutes to process.

When I asked our rep about it they went “eh it’s normal”.

This same company designed a XML SOAP API where if you request too much data, it just returns a HTTP 200 with no content. No error message or formatted SOAP reply, just completely nonsensical response.

I hate this company but there’s literally very few choices in this space.

This would depend on whether the limit is defined as ingress or egress or both. For example AWS has free ingress traffic from the internet but there is a cost for egress traffic to the internet.

A better solution would be to find a unmetered service, which means that you have a fixed transfer speed (e.g. 500 Mbit) but have unlimited bandwidth. OVH offers this in their VPS products.

Using a normal Google account it has a bunch of checkmarks on https://gemini.google.com/u/1/apps but this is not available on my Workspace account.

The fiber we use at our datacenter is quite flexible but still gets damaged if you bend it too far. To roll it like they describe you would still want to have a fairly large drum (probably like 3-4 inches in diameter) which would make it pretty bulky for a small drone.

Since Stargate is my go-to scifi I’m kinda offended at the “doesn’t take itself too seriously”. Sure it’s not as hard on the science as The Expanse (you know, except for the magic portals to other stars), but it feels like it takes itself pretty seriously. There are obvious bottle episodes that were probably written for other shows and shoe-horned in because they were cheap to buy and produce.

For #2, I think this would get pretty old pretty fast, not to mention that they have to fit everything into runtime constraints. Every new planet the team spends months researching the new language. Sure, you could handwave it (we found a Goa’uld translator just laying around), but that would be back to just one language. Since the Stargate presents an instant transportation rather than the days/months/years of starship travel it would make sense that languages stay fairly consistent as people move from planet to planet.

For #3, they pretty much handwave this in SG-1 as the majority of planets in the Milky Way were repopulated by the ancients in their image, and others were transferred from Earth.

Sadly, most of the ones I’ve found are too complicated, and getting all devices to accept the CA is more hassle than it’s worth for self hosting. I’ve given up and just buy my wildcard cert for 60$/yr and just put it on everything.

exFAT is an extension of the FAT32 filesystem that allows for larger drive sizes and file sizes and is mostly used on SD cards. Despite the name similarities it has nothing to do with the ext filesystem, and won’t support the same features as it (such as symlinks).

Here’s a snapshot of the memory of a running live cd of Ubuntu. I ran a script to load 0123456789abcdef over and over and it’s clearly readable. Nothing special is required for this, as the Hypervisor has access to anything that the VM does. If the VM loads the encryption key for your disk into memory it will be available to the provider.

Dunno what rock you were hiding under but this is absolutely possible in a hosted environment. There’s even ESXi documentation on how to do it. Taking a snapshot can be detected, but can’t be prevented. These memory dumps can include encryption keys, private keys (such as SSL certificates) and other sensitive data.

Unless you can physically touch the drive with your data on it, I would not store any sensitive data on it, encrypted or not.

The DNS-01 challenge can be used to generate a wildcard by creating the requested dns record in your public dns zone, then you can use that cert for internal servers/dns. With certain dns providers it can even be automated.

https://eff-certbot.readthedocs.io/en/stable/using.html#third-party-plugins

While this is a great writeup on Lemmy instances, the thread was specifically about Mastodon and it’s numerous forks. I believe they use the same tech but are vastly different things. The instance I found wasn’t quite Mastodon apparently, even though it works very similar and the app designed to connect to a Mastodon instance wouldn’t connect to it.

I’ve been looking for a new instance to join due to various reasons. Ended up setting up and account somewhere and spending 2 hours manually copying over various settings only to find my Moshidon client won’t even connect with that new instance. Normal people are just going to quit when that happens.

You mentioned ping. If you’re using Termux you may need to manually update its DNS settings (different from the system DNS). The file is /data/data/com.termux/files/usr/etc/resolv.conf

To make it roam you probably want your home dns first then some internet resolvers after that.

In days past some drive vendors had different sector layouts for drives and would cause issues with raid. Pretty sure most nowadays are all the same layout and you won’t run into any issues. I still look to get the same drive model anyways just to be perfectly sure that there are no issues.

Even then you may run into weird issues like one of my 1.2 TB enterprise ssd drives was reporting 1.12 TiB rather than 1.09 TiB the other 7 drives had. TrueNas refused to build a vdev with that drive and I had to return it to get a new one.

Typically a Fiber ISP will run Fiber optics only to your DEMARC (or Demarcation) point. This will be usually where your main cable (before any splits) or DSL line used to come in (in the US they’ve been using Orange tubes to indicate this and it will usually run to a panel in some closet or laundry). At the DEMARC they’ll install one of two things: a basic fiber to ethernet converter which will provide you a single ethernet port and a pure tap to the internet, or a Gateway device that will convert the fiber to multiple eithernet with NAT (usually providing other capabilites like TV, Phone, etc).

If you have the latter, you may not get much say in what you can do with your connection, and would be limited to a DMZ mode that is configured on the Gateway. What you put behind the converter or gateway is up to you.

I’ve got my mom setup on their PC backup service, no complaints so far (on the Backblaze side that is, she still insists that she doesn’t need continuous backups even though I’ve had to restore multiple times for her).

I switched my backups from Crashplan to B2 as it was significantly cheaper than going to AWS. B2 is more expensive than what I was paying for Crashplan Pro Unlimited (about 8x for the amount of data I have), but I have more peace of mind with it not relying on Crashplan’s terrible Java client.

A reminder that the only good backup is a tested backup.

Yes, ULA are one of the exceptions I mentioned. It covers fc00::/7 which is fc00 to fdff, though I believe most use just the top half. I use one for an intermediate network between my edge router and my primary firewall to not consume one of my limited /64 networks.

I haven’t played with IPV6 NAT much. I know its use is a bit discouraged as NAT was always designed as a stopgap measure for IPV4 exhaustion. It might be a good option if you need additional space and your ISP doesn’t support additional prefixes. Just keep in mind that if you use these in DNS, they won’t be accessible externally.

Its a bit complicated and depends on your ISPs support level.

If your ISP supports basic IPv6 they will likely use SLAAC or DHCPv6 to advertise the /64 that any directly connected devices, like your router, can use (/64 being the default size for a single LAN segment, even between point-to-point connections). If you have devices behind that router that want to use IPv6, you will need additional prefixes. The most common method nowadays is to use Prefix Delegation (DHCPv6-PD) where your router will ask the upstream router for an additional routeable prefix which you will use on another interface of the router. The RFC for prefix delegation recommends a /48, but many ISPs are not delegating that much. I only get half of a /60 from my ISP’s modem.

If the ISP just provides you a static routeable prefix, then you would just assign that to your router’s interface and enable SLAAC/DHCPv6 to give out that prefix. This would only need to be configured in a single device and is why they don’t recommend hard coding servers and workstations with IPV6 addresses.

Keep in mind that your router will also need a firewall as all of these IPv6 prefixes are routeable and public. While IPV6 space is quite like finding a needle in a haystack, you could still find yourself having a bad day if you treat it like private IPV4 space.

The end result though is that you would setup DNS so that devices register their IPv6 addresses and it just works. There’s also the MDNS protocol that supports IPv6 which will do segment-local resolution for device names.